National General Certificate syllabus Essay Example for Free

field planetary authentication syllabus EssaySyllabus abstract interior(a) prevalent certificatein occupational wellness and SafetyJanuary 2013Syllabus summary NEBOSH National prevalent Certificate in occupational wellness and Safety (January 2013 specification)Syllabus summary NEBOSH National General Certificatein Occupational health and Safety (January 2013specification)StructureThe syllabus is divided into 3 unit of measurements. Unit NGC1 is further divided into five elements and Unit GC2 into ogdoad elements.Unit NGC1 Management of health and pencil eraser component partNumberElement TitleRecommendedhoursPage1Foundations in health and refuge642 health and sentry go managementsystems Policy443Health and safety managementsystems Organising654Health and safety managementsystems Planning1155Health and safety managementsystems Measuring, audit andreview96Minimum unit tuition clipping36Recommended private studytime23 NEBOSH 20131Syllabus summary NEBOSH Nation al General Certificate in Occupational Health and Safety (January 2013 specification)Unit GC2Control of toyplace hazardsElementNumberElement TitleRecommendedhoursPage1 roleplayplace hazards and risk prevail872Transport hazards and risk authorization473Musculoskeletal hazards and riskcontrol684Work equipment hazards and riskcontrol685 galvanizing safety396Fire safety697Chemical and biological healthhazards and risk control6108Physical and psychological healthhazards and risk control310Minimum unit tuition time42Recommended private studytime26 NEBOSH 20132Syllabus summary NEBOSH National General Certificate in Occupational Health and Safety (January 2013 specification)Unit GC3 Health and safety practical applicationRecommendedHoursPageHealth and safety practicalapplication211Minimum unit tuition time2Recommended private studytime4Minimum total tuition time80Recommended total privatestudy time53Total overall hours133ElementNumber1Element Title NEBOSH 20133Syllabus summary NEBOSH Na tional General Certificate in Occupational Health and Safety (January 2013 specification)Unit NGC1Management of health and safetyElement 1Foundations in health and safetyLearning outcomesOn fulfilment of this element, candidates should be cap fitted to demonstrate concord of the mental ability by means of the application of acquaintance to acquainted(predicate) and unfamiliar situations. In special(prenominal) they should be up to(p) to chalk out the scope and nature of occupational health and safety let off the moral, social and economic reasons for maintaining and promoting good standards of health and safety in the bunkplace explicate the role of national governments and international bodies in formulating a framework for the regulation of health and safety.Recommended tuition time not little than 6 hoursElement 2Health and safety management systems 1 PolicyLearning OutcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through and through the application of knowledge to familiar and unfamiliar situations. In particular they should be able to enlist the key elements of a health and safety management system beg off the purpose and importance of setting policy for health and safetyDescribe the key features and appropriate content of an effective health and safety policy.Recommended tuition time not less than 4 hours NEBOSH 20134Syllabus summary NEBOSH National General Certificate in Occupational Health and Safety (January 2013 specification)Element 3Health and safety management systems 2 OrganisingLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they should be able toOutline the health and safety roles and responsibilities of employers, managers, supervisors, workers and other relevant parties relieve the concept of health and safety culture and its significance in the management of health and safety in an organisationOutline the human factors which influence demeanour at work in a way that can affect health and safetyExplain how health and safety behaviour at work can be improvedOutline the need for emergency procedures and the arrangements for contacting emergency services.Recommended tuition time not less than 6 hoursElement 4Health and safety management systems 3 PlanningLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they should be able toExplain the importance of planning in the context of health and safety management systemsExplain the principles and practice of risk assessmentExplain the general principles of control and a basic hierarchy of risk reduction measuresIdentify the key sources of health and safety informationExplain what factors shoul d be considered when developing and implementing a safe system of work for general activitiesExplain the role and function of a permit-to-work system.Recommended tuition time not less than 11 hours NEBOSH 20135Syllabus summary NEBOSH National General Certificate in Occupational Health and Safety (January 2013 specification)Element 5Health and safety management systems 4 Measuring, audit and reviewLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they should be able toOutline the principles, purpose and role of active and reactive monitoringExplain the purpose of, and procedures, for health and safety auditingExplain the purpose of, and procedures for, investigating incidents (accidents, cases of work-related ill-health and other occurrences)Describe the legal and organisational requirements for recording and reporting incident sExplain the purpose of, and procedures for, regular reviews of health and safety performance.Recommended tuition time not less than 9 hours NEBOSH 20136Syllabus summary NEBOSH National General Certificate in Occupational Health and Safety (January 2013 specification)Unit GC2Element 1Control of international workplace risksWorkplace hazards and risk controlLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they should be able toOutline common health, welfare and work environment requirements in the workplaceExplain the risk factors and appropriate controls for violence at workExplain the effects of substance mis intake on health and safety at work and control measures to reduce such risksExplain the hazards and control measures for the safe movement of people in the workplaceExplain the hazards and control measures for safe wo rking at heightOutline the hazards and control measures for temporary works.Recommended tuition time not less than 8 hoursElement 2Transport hazards and risk controlLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they should be able toExplain the hazards and control measures for the safe movement of vehicles in the workplaceOutline the factors associated with driving at work that increases the risk of an incident and the control measures to reduce work-related driving risks.Recommended tuition time not less than 4 hours NEBOSH 20137Syllabus summary NEBOSH National General Certificate in Occupational Health and Safety (January 2013 specification)Element 3Musculoskeletal hazards and risk controlLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the appl ication of knowledge to familiar and unfamiliar situations. In particular they should be able toExplain work processes and practices that whitethorn give rise to work-related upper limb disorders and appropriate control measuresExplain the hazards and control measures which should be considered when assessing risks from manual handling activitiesExplain the hazards and controls to reduce the risk in the use of lifting and moving equipment with specific reference to manually-operated load moving equipmentExplain the hazards and the precautions and procedures to reduce the risk in the use of lifting and moving equipment with specific reference to provide load handling equipment.Recommended tuition time not less than 6 hoursElement 4Work equipment hazards and risk controlLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they shou ld be able toOutline general requirements for work equipmentExplain the hazards and controls for hand-held toolsDescribe the main mechanical and non-mechanical hazards of machineryExplain the main control methods for reducing risk from machinery hazards.Recommended tuition time not less than 6 hours NEBOSH 20138Syllabus summary NEBOSH National General Certificate in Occupational Health and Safety (January 2013 specification)Element 5Electrical hazards and controlLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they should be able toOutline the principles, hazards and risks associated with the use ofelectricity in the workplaceOutline the control measures that should be taken when working with electrical systems or using electrical equipment in all normal workplace conditions.Recommended tuition time not less than 3 hoursElem ent 6Fire hazards and controlLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they should be able toDescribe the principles of fire initiation, classification and spreadOutline the principles of fire risk assessmentDescribe the basic principles of fire streak and the prevention of fire spread in buildingsOutline the appropriate fire alarm system and fire-fighting arrangements fora simple workplaceOutline the factors which should be considered when implementing a booming evacuation of a workplace in the event of a fire.Recommended tuition time not less than 6 hours NEBOSH 20139Syllabus summary NEBOSH National General Certificate in Occupational Health and Safety (January 2013 specification)Element 7Chemical and biological health hazards and riskcontrolLearning outcomesOn completion of this element, candidates should be able to demonstrate understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they should be able toOutline the forms of, the classification of, and health risks from picture show to hazardous substancesExplain the factors to be considered when undertaking an assessment of the health risks from substances commonly encountered in the workplaceDescribe the use and limitations of occupational exposure limits including the purpose of long term and short term exposure limitsOutline control measures that should be used to reduce the risk of ill-health from exposure to hazardous substancesOutline the hazards, risks and controls associated with specific agentsOutline the basic requirements related to the safe handling and storage of waste.Recommended tuition time not less than 6 hoursElement 8Physical and psychological health hazards and riskcontrolLearning outcomesOn completion of this element, candidates should be able to demonstrat e understanding of the content through the application of knowledge to familiar and unfamiliar situations. In particular they should be able toOutline the health effects associated with exposure to noise and appropriatecontrol measuresOutline the health effects associated with exposure to vibration and appropriate control measuresOutline the principal health effects associated with ionising and non-ionising radiation and basic protection techniquesOutline the meaning, causes and effects of work-related stress and appropriate control actions.Recommended tuition time not less than 3 hours NEBOSH 201310Syllabus summary NEBOSH National General Certificate in Occupational Health and Safety (January 2013 specification)Unit GC3Health and safety practical applicationLearning outcomesDemonstrate the ability to apply knowledge of the unit NGC1 and GC2 syllabus, by successful completion of a health and safety inspection of a workplaceComplete a report to management regarding the inspection wi th recommendations. capabilityThis unit contains no additional syllabus content. However, completion of study for unit NGC1 and GC2 is recommended in order to undertake the practical application unit GC3.Link to question unit(s)Unit GC3 is not normally offered independently of the taught elements. Students will normally be required to complete the GC3 assessment within 10 working days (before or after) of sitting the examination for Units NGC1 and/or GC2. NEBOSH 201311Syllabus summary NEBOSH National General Certificate in Occupational Health and Safety (January 2013 specification)Unit estimationUnits NGC1 and GC2 are taught units each assessed by one two-hour written examination. Each examination consists of ten short-answer questions and one long-answer question. All questions are compulsory.Candidate scripts are marked by external examinersappointed by NEBOSH.Unit GC3 is assessed by a practical assessment the time to complete the assessment is not restricted but candidates sho uld declare oneself to complete the inspection and the report within two hours. This is held on a date set by the course provider and must be taken within 10 working days of a written examination. The practical assessment is internally assessed by the courseprovider and externally moderated by NEBOSH. foster detailsThe full syllabus and further information regarding the practical unit is available in the NEBOSH Guide to the qualification available for purchase via the NEBOSH website (www.nebosh.org.uk).NEBOSH National General Certificate in Occupational Health and Safety Version 1Specification date January 2013Syllabus summary publication date September 2013The National Examination Board in Occupational Safety and Health (NEBOSH), Dominus Way, Meridian Business Park, Leicester LE19 1QW.Registered Charity Number 1010444TelephoneFaxEmailWebsite+44 (0) 116 263 4700+44 (0) 116 282 4000emailprotectedwww.nebosh.org.ukNGC SS180913 NEBOSH 201312